Update Instructions

Note: Do not unzip the service release files to your default CAD/CAM directory.

A. Update FabriWIN

  1. To update your FabriWIN from the previous version, please click here to retrieve the archive files.

  2. When the File Download dialog box appears, select "Save this file to disk" and click OK. The Save As dialog box appears.

  3. Click the Save button. The Self-Extract Zip file FabriWIN9.51.exe will be saved to the desktop by default.

  4. Unzip the file to a temporary folder, like c:\temp.

  5. Copy backup.bat to the C:\FabriWIN folder or the CAD/CAM system folder and run it.

  6. Copy the unzipped files in c:\temp\fabriwin to the CAD/CAM system main folder you specified before. The default folder is C:\FabriWIN. Your CAD/CAM System is now updated.

B. Update FabriWIN for CATIA

Note: Do not unzip the service release files to your default CAD/CAM directory.

  1. To update your FabriWIN for CATIA from the previous version, please click here to retrieve the archive files.

  2. When the File Download dialog box appears, select "Save this file to disk" and click OK. The Save As dialog box appears.

  3. Click the Save button. The Self-Extract Zip file FabriWINCATIA9.51.exe will be saved to Desktop by default.

  4. Unzip the file to a temporary folder, like c:\temp.

  5. Copy backup.bat to the C:\FabriWIN folder or the CAD/CAM system folder and run it.

  6. Copy the unzipped files in c:\temp\fabriWINcatia to the CAD/CAM system main folder you previously specified. The default folder is C:\FabriWIN. Your CAD/CAM System is now updated.

C. Update FabriWIN for NT System

Note: Do not unzip the service release files to your default CAD/CAM directory.

  1. To update your FabriWIN from the previous version, please click here to retrieve the archive files.

  2. When the File Download dialog box appears, select "Save this file to disk" and click OK. The Save As dialog box appears.

  3. Click the Save button. The Self-Extract Zip file FabriWINNT9.51.exe will be saved to Desktop by default.

  4. Unzip the file to a temporary folder, like c:\temp.

  5. Copy backup.bat to the C:\FabriWIN folder or the CAD/CAM system folder and run it.

  6. Copy the unzipped files in c:\temp\fabriWINcatia to the CAD/CAM system main folder you previously specified. The default folder is C:\FabriWIN. Your CAD/CAM System is now updated.

D. Updating Unfold 3D

  1. To Upgrade Unfold3D of FabriWIN, please click here to get the archive files.

  2. When the File Download dialog box appears, select "Save this file to disk" and click OK. The Save As dialog box appears.

  3. Click the Save button. The file will be saved to the desktop by default.

  4. Unzip the file to a folder like c:\temp.

  5. Copy backup.bat to the C:\Unfold3D\ FabriWIN\ folder and run it.

  6. Copy the unzipped files/folder(s) in c:\temp\Unfold3D\ to the Unfold3D folder you previously specified. The default folder is C:\Unfold3D\ FabriWIN\. Your Unfold 3D applications are now updated.

Fixed Issues

Reposition

  The system would not clear the reposition was not cleared after the shearing sequence was reset.

Sequence

The user could not add any subsequent sequencing to a tool after using "Control One Tool Sequence" to remove the sequence from the tool.

Other

Auto Shearing would try to shear the top of the sheet when there was little or nothing to shear.

Shearing had a 0.5 overcut at the center of some sheets between the different grids, and the output NC RX data was wrong.

Shearing for some sheets had a 0.5 overcut at the end of the shearing sequence.

NC Code Generation

The NC code output for Auto Work Chute function was wrong for Trumpf machines.

Cut Sequence
When you set the clamps along the top of the sheet, the system would still avoid the bottom area during the cutting process because it regarded the area the clamp dead zone.

Enhancements

Improvements have been made in the vertical shearing and overtravel.